Language: English
ISBN/ISSN: 7562818045
Published on: 2005-01
Hardcover
Contents
1.Preface
2.From the editor
3.Communication forum
4.Multiscale cracking aggravated by environment: effects of electron behavior on local chemistry
5.Scaling of thermal damage of cementitious materials
6.Fatigue life prediction of U-rib to crossbeam joints using strain energy density factor approach
7.Research on corrosion fatigue of tube-to-tubesheet weld joint
8.Estimation of threshold value for stress corrosion cracking of typical steel for pressure vessel under wet H2S environment
9.Processing and mechanical properties of porous 316L stainless steel for artificial hip joints
10.Combine emission of edge and screw dislocations form micro-crack caused by residual stresses in and out-of the plane
11.Effect of micro-scale residual antiplane stress on crack behavior in viscoelastic medium
12.J-integral method of FEM in calculation of SCC
13.Constitutive relation and evolution equation of power hardening material fatigue damage
14.Time-dependent deformation in cracked SUS304 steel at room temperature and its effects on fatigue crack growth
15.A new ultrasonic method to evaluate dislocation change under fatigue damage process
16.Maximum energy difference theory for crack propagation
17.Research on damages in ground advanced ceramics
18.Impact simulation of CFRP-steel shell
19.Electrochemical test of 304 stainless steel and fractal characteristic of pits distribution
20.Comparison of fatigue crack growth rates of 17-4PH, 1Cr13 and 2 Cr13 in chloride environment
21.Experimental studies on fatigue strength of dissimilar steel weld joint for underwater runner blade
22.Stress corrosion cracking tests of 20g steels in typical sulphur removing system
23.The fracture performance of steel fiber reinforced concrete with grade two aggregate
24.Investigation on aging effect of plain woven glass fiber reinforced epoxy laminates in acidic conditions
25.Rapid sintering of AL2O3-8YSZ bioceramic composites by high-frequency induction heating
26.Finite element prediction of residual stresses and thermal distortion in a brazed plate-fin structure
27.Creep fracture toughness of welded joint for 2.25Cr1Mo steel
28.Stress relaxation testing for analysis of SA335-P91 steel creep behavior
29.Creep stress calculation model for ethylene cracking furnace tubes under consideration of carburization
30.Fatigue-creep interaction behavior of 1.25Cr0.5Mo steel and condition free from creep invalidation analysis
31.Processing f high porosity Ti-6Al-4V by powder sintering process for biomedical applications
32.Experimental study on the assembled support structure with GFRP disc and oCr18Ni9 pipe for cryogenic vessels
33.Environment-corrosion failure of the stainless-steel corrugated pipe
34.Study on the plastic limit load of elbows with local thinned area under combined internal pressure and in-plane closing bending moment
35.Some aspects of practical application of risk-based inspection(RBI)
36.Investigation of temperature distributions and deformations for coke drums
37.Stress analysis of ceramic-lined steel pipe fabricated by centrifugal thermite process
38.An investigation of the failure of low pressure steam turbine blades
39.What can be done about stress corrosion cracking?
40.Numerical simulation of 3-D mixed-mode crack propagation on biomaterial interfaces
41.Randomness & environmental effects in creep cavitation
42.Experience with cracking in steel bridges
43.Environmentally assisted damage evolution and LCEM
44.Smart sensing technology for large-scale structural systems
45.Spatial statistics of particles and pitting corrosion in aluminum alloys
46.Mechanical properties of laminated glass
47.U.S. electric power generation and cracks in boilers
48.Stress corrosion crack growth in BWR piping systems
49.Fracture of bridge cable wire
50.Numerical analysis of fracture and failure instability during shear debonding at FRP-concrete interface
51.Multiscale material modeling: theories and applications
52.Fatigue behavior of 2D-C/SiC notched specimen at elevated temperature
53.Structural health evaluation for long-span bridges with monitoring system
54.NSF research in mechanics computational & other areas
